Autel Robotics EVO II Pro Drone
Autel EVO 2 Pro ultra-HD camera done featured a 1-inch sensor with 6k resolution. Capture stunning detail not previously possible on an aerial platform of this size. An adjustable aperture, HDR and intuitive camera controls make this the perfect choice for any aerial cinematographer or mapping pilot.
Autel EVO II Pro 6k Camera, 40MIN Flight Time, 9KM Extended Range
1-inch sensor & Adjustable aperture: EVO II Pro 6k drone featured Ultra-HD camera with a 1-inch sensor: Takes photos with a resolution of up to 5472 x 3648, and records 5.5K video at 60 fps or 4K video at 120 fps, with a bit rate of up to 120 Mbps. The lens aperture is adjustable within the range of f/2.8 to f/11.
40min of flight time & 9KM Extended Range: Autel EVO II Providing up to 40min of flight time in forward motion to up to 9km away and 35min at a hover.
Variety of shooting modes
All three camera modules support a variety of shooting modes, including: Single-shot; Burst shooting; Auto exposure bracketing (AEB); Time-lapse; High-dynamic-range (HDR) imaging; NIGHTBEAT (high signal-to-noise ratio)
Auto go home & Accurate Landing
EVO 2 Pro will return home automatically when Low Aircraft Battery Level and Communication Lost. Additionally, EVO 2’s bottom binocular vision camera to create a density depth map. Then, it calculates the depth map's flatness and angles to ensure an accurate and safe landing.
EVO 2 Battery 7100mAh
Autel EVO 2 Pro comes with 7100mAh rechargeable battery. Providing up to 40min of flight time in forward motion to up to 9km away and 35min at a hover.
8GB and Up to 256GB Expandable
EVO Drone comes with 8GB built-in memory and supports up to Max 256GB SD card to store those stunning 48MP stills and HDR videos.
A high-definition live feed from the EVO 2 drone camera can be displayed on your remote control’s screen.
Standard Package In the Box
1:Aircraft, Battery and Gimbal Holder*1
4:Remote Control Cable – Type B*1
6:USB connection cable (2pcs: Micro Type B & Type C)
Disclaimer & Safty Instructions
Battery Safe Use Guide
Rugged Bundle In the Box
1:Aircraft, Battery and Gimbal Cover*1
5:Remote Control Cable – Type B*1
8:USB connection cable (2pcs: Micro Type B & Type C)*1
Disclaimer & Safty Instructions
Battery Safe Use Guide
Note: There are a total of 3 pairs of propellers in this EVO II drone package kit, including the propellers on the drone's fuselage.
Q: What is the difference between EVO II and EVO II Pro?
The only difference between the two products is the PTZ camera, and the rest of the performance is the same.
Q: What is the the maximum flight time of the EVO II Pro?
40 minutes max flight time (when flying in a steady environment).
Q: Is the EVO II Pro waterproof?
Q: What is the maximum wind resistance of the EVO II Pro?
Q: What is the effective image transmission distance?
Under the FCC standard, the maximum image transmission distance is 9km; under the CE standard, the maximum image transmission distance is 5 km.
Q: What should I do if the image transmission signal becomes weak during flight?
Check your surroundings for potential interference factors and then adjust the orientation of your antennas to enhance signal strength.
Q: Can I change the gimbal mount?
Q: What types of shooting formats does the camera support?
Photo format: JPEG (default) + DNG; Video format: MOV (default) + MP4.
Q: What camera modes are available?
Single shooting, continuous shooting, timing, pure night shooting, long exposure, HDR imaging.
Q: What is the zoom range of the camera?
1-8x zoom and 3x lossless zoom.
Q: What are the advantages of the EVO II Pro camera in shooting video?
It can shoot 5472×3076 resolution 6K video at a bit rate of 120Mbps, and supports 4K HDR video shooting.
Q: How long does it take to fully charge the battery?
It takes approximately 90 minutes to fully charge each battery.
Q: How does one maintain the battery?
1. Do not expose the battery to temperatures below -10°C or above 40°C, which will shorten the battery life and may cause fire, explosion or other permanent damage;
2. Do not charge immediately after flight; it is recommended to charge the battery after it has dropped to room temperature;
3. The ideal charging environment temperature of the battery is 10 °C~30 °C;
4. The ideal storage environment temperature of the battery is 22 °C~28 °C. When storing, it should be waterproof and moisture-proof, and avoid sunlight;
5. Recharge and discharge the battery every 3 months or so to keep the battery active.
Q: Can the battery be used in a low temperature environment?
Using the battery in a low temperature environment may reduce the battery life. For optimal performance, it is recommended to keep the battery temperature above 15 °C before flying.
Q: Can the battery be carried on board?
A single battery contains 82Wh. According to airline requirements, the battery can be carried on board.
Q: Can the remote controller of EVO II and EVO II Pro interchangeable?
Q: Does the remote controller support HDMI output?
Q: How many ports does the remote control have?
There is a Micro USB port and a Type-A port at the bottom of the remote controller, which can be used for connecting external devices and charging.
Q: Does the remote control have custom buttons?
There are two customizable buttons on the back of the remote controller, and 4 functions can be customized through the APP.
Q: The body is equipped with and how many vision sensors?
There are 12 in total, with two vision sensors each on the front, back, left, right, up, and down.
Q: Can the downward fill light be turned on and off manually?
It can be turned on or off manually, or it can be automatically turned on or off according to environmental conditions.
Q: How to upgrade the firmware?
You can download the firmware package manually through the official website, or update the firmware through the Autel Explorer application.
Q: After downloading the firmware package, can I disconnect the network to upgrade?
Q: What are the factors that can cause the upgrade to fail?
A. If the device is turned off during the upgrade process, the upgrade will fail.
B. If the network is interrupted while downloading the firmware package, the upgrade will fail.
C. Only when the remaining battery power of the device is ≥ 50% can the upgrade be performed.